Quick Start Guide

Robot-Assisted Surgery (RAS) At Sunnybrook

• Dr. Alia Busuttil is the Anesthesiology clinical lead for the RAS program, debuted in October 2024.

• The da Vinci Xi robotic surgical platform is located in OR 2.

• Surgical services include urology, gynecology and general surgery.

Benefits Of Robot-Assisted Surgery

• Magnified three-dimensional vision.

• Digitally controlled hand movement with algorithm to filter out natural hands tremor.

• More degrees of maneuverability / superior dexterity of robotic instruments.

• Reduction in blood loss, length of stay, 30-day overall complication rate and post op pain compared to open procedures. When compared with MIS, there is still some evidence to suggest reduced length of stay, conversion rate and EBL.

Disadvantages Of Robot-Assisted Surgery

• Capital cost

• Steep learning curve

• Longer procedure time

• Potential complications related to extreme position (e.g. steep Trendelenburg) and pneumoperitoneum for prolonged period of time (see anesthesia considerations below)

Brief Overview Of da Vinci Xi

• Intuitive Surgical Inc.'s 4th generation robotic platform.

• The platform has been in production since 2014.

• The system comprises of Three main components:

1. Surgeon Console

The operating surgeon seated at the Surgeon Console with three-dimensional endoscopic view of the surgical field and hand controls for instruments and endoscope.

2. Patient Cart

Patient Cart Helm

The draped patient cart is positioned by the OR table in the sterile field, exact cart orientation depends on each specific surgery, target anatomy and patient's position. Endoscope and instruments are attached / detached to each of the 4 arms by patient-side surgical assistant.

Close-up view of 1 of the 4 arms

3. Vision Cart

The Vision Cart includes the supporting electronic equipment such as the light source and video image processing equipment for the endoscope and the main electronic and software processing units. The Vision Cart also has a touchscreen to view the endoscopic image and adjust system settings.

OR Configuration & Carts Placement

• Surgeon Console is located outside the sterile field, positioned in such a way that the surgeon has an unobstructed view of the operative field, vision cart and be able to communicate directly with the rest of the OR team e.g. anesthesiologist, assistant surgeon and scrub nurse.

• Patient Cart is properly draped and located within the sterile field. Its position is surgery-specific and dependant on surgeon's preference.

• Vision Cart is positioned adjacent to the Patient Cart just outside the sterile field allowing assistant surgeon & scrub nurse to see the endoscopic surgical view.

• Surgeries of pelvic organs (e.g. prostatectomy), the Patient Cart can also be positioned between patient's legs

• 

  Patient Cart position with respect to location of target anatomy.

  

  

  
  

Docking Of Patient Cart

• Docking refers to the process of attaching Patient Cart instrument and camera arms to the patient.

• Following are the sequential steps of docking:

  1. Anesthesia induction and intubation on the OR table.

  2. Placement of additional IV / arterial lines / NG / Foley catheters.

  3. Position the patient and OR table including necessary tilt.

  4. Patient prepped and preliminary laparoscopy performed to assess anatomy, suitability for robotic surgery.

  5. PortsAdditional ports (assistant / robotic instruments / camera) placement.

  6. Bring Patient Cart to the desirable final position.

  7. Dock the camera arm first and then the instrument arms.

Once

the arms are docked to the ports and instruments placed, patient position should not be changed. Any inadvertent patient's movement could potentially cause disastrous intra-abdominal trauma by the instruments / camera.

The OR table (Baxter TruSystem 7000dv) wirelessly communicates with the da Vinci Xi system to allow Integrated Table Motion i.e. movement of OR table will be automatically coordinated with the robot so that the patient and robotic arms move in unison. Therefore controlled table movement is feasible without any undocking and redocking.